• Nakum Ashvin P.
• Anil K. Sisodia

A four port corporate feed network by using Wilkinson power divider is described which splits a signal into ‘n’ equal phase and equal amplitude parts where n can be odd or even. The feed network provides isolation between output terminals and approximately matched terminal impedance over desired frequency. A schematic of feed network is given which satisfies the necessary design parameters, and an experimental model is described at 1176.45 MHz, which has a minimum return loss at each port is about -35 dB, isolation of -57 dB between outputs, Insertion loss -6.344 and all output port are in-phase (<0.5 degree) .

Wilkinson power divider, corporate feed network, In-phase, Isolation.

"Design of corporate feed network using Wilkinson power divider", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.2, Issue 3, page no.555-558, March-2015, Available :http://www.jetir.org/papers/JETIR1503029.pdf

"Design of corporate feed network using Wilkinson power divider", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.2, Issue 3, page no. pp555-558, March-2015, Available at : http://www.jetir.org/papers/JETIR1503029.pdf