• Mustafa Telwala
• Anand Parikh
• Vaja Hitesh
• HardikbhaiDabhi
• Rajdipsinh G. Vaghela

Power press working is defined as chip less manufacturing process. We can also say as cold stamping process. The machine used for press working is known as press. Press has a frame, a bed or bolsters plate and a reciprocating element called ram which exerts force upon work material through special tool mounted on it and bolster. Press works on impact load condition cause that continuous impact load on frame and press machine experience tensile & bending stress also. Press machine continuous deals with stress and because of that frequently structural failure problem occurred in machine. To compensate this failure c-frame has to fulfill certain critical constraints. Software solid works has been used for this analysis with main aim to optimized cost as well as design of c-frame without changing quality of the output.

C-Frame, FEA, Stress Concentration, solid works, Weight reduction

"A REVIEW ON COST OPTIMIZATION OF POWER PRESS BY ANALYSIS OF C-FRAME USING SOLID WORKS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.2, Issue 11, page no.113-119, November-2015, Available :http://www.jetir.org/papers/JETIR1511020.pdf

"A REVIEW ON COST OPTIMIZATION OF POWER PRESS BY ANALYSIS OF C-FRAME USING SOLID WORKS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.2, Issue 11, page no. pp113-119, November-2015, Available at : http://www.jetir.org/papers/JETIR1511020.pdf