UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 4 Issue 3
March-2017
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR1703027


Registration ID:
170143

Page Number

127-129

Share This Article


Jetir RMS

Title

“SUITABILITY OF CONCRETE BY USING CUPOLA SLAG AS PARTIAL REPLECEMENT OF COARSE AGGREGATE AND FOUNDRY SAND AS PARTIAL REPLECEMENT OF FINE AGGREGATE: A CRITICAL REVIEW”

Abstract

The simplest way of getting aggregate is from naturally available sources. Excavation of rocks from valley which is generally produces worst environmental impacts. Cutting and screening out of coarse aggregate makes the conventional concrete more costly and scarce due to small sized limited quantity of natural materials which is used. Cupola slag can be use in construction industry as replacement of coarse aggregate and Foundry sand as fine aggregate. Cupola slag is the byproduct of cast iron manufacturing, produced when molten steel is separated from impurity in cupola furnace. Foundry sand is also byproduct, which is gathered in foundry where it is not reused in foundry. Cupola slag is replaced with coarse aggregate and Foundry sand is replaced with fine aggregate with optimum percentage of replacement to check the suitability of concrete to Mechanical properties, Durability, Workability and Environmental feasibility. In this paper, the past work and the experimental work done by various people according to their views is studied. To conclude in the end, from physical properties of cupola slag that there are similarities between cupola slag and coarse aggregates and physical properties of foundry sand that there are similarities between foundry sand and fine aggregate. Both materials are eco-friendly building material. The problem of the disposal and maintenance problem of land filling is reduced. They are taken 0 to 100% replacement and get different strength but required and appropriate result get up to 60% replacement to use both byproduct materials.

Key Words

Cupola slag, Foundry sand, Coarse aggregate, Fine aggregate

Cite This Article

"“SUITABILITY OF CONCRETE BY USING CUPOLA SLAG AS PARTIAL REPLECEMENT OF COARSE AGGREGATE AND FOUNDRY SAND AS PARTIAL REPLECEMENT OF FINE AGGREGATE: A CRITICAL REVIEW”", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.4, Issue 3, page no.127-129, March-2017, Available :http://www.jetir.org/papers/JETIR1703027.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"“SUITABILITY OF CONCRETE BY USING CUPOLA SLAG AS PARTIAL REPLECEMENT OF COARSE AGGREGATE AND FOUNDRY SAND AS PARTIAL REPLECEMENT OF FINE AGGREGATE: A CRITICAL REVIEW”", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.4, Issue 3, page no. pp127-129, March-2017, Available at : http://www.jetir.org/papers/JETIR1703027.pdf

Publication Details

Published Paper ID: JETIR1703027
Registration ID: 170143
Published In: Volume 4 | Issue 3 | Year March-2017
DOI (Digital Object Identifier):
Page No: 127-129
Country: kutch, Gujarat, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0003148

Print This Page

Current Call For Paper

Jetir RMS