• VINAYAK M.SAMLETI
• Prof.V.V.Potdar

Now a day’s the application of optimization techniques are very useful for maintaining and improving both the quality and productivity. In this paper the overview on, the optimization of different parameters in drilling process is given through literature review. Analysis of variance (ANOVA) was used to determine the most significant control factors affecting the surface roughness. The response surface methodology (RSM) and design of experiments (DOE) techniques are largely used in the various research works on drilling process. The quality of drilling processes depends on different parameters like cutting speed, feed rate, drill diameter, depth of cut, material type, etc. during operation. The researchers in the following literature review have worked on drilling process by taking into consideration the above mentioned factors. In this present paper the parametric optimization of the drilling machining process for Surface roughness (Ra) has been performed using Taguchi method.

Drilling process; Machining parameters; Surface roughness; Response surface method, Design of experiments, Analysis of variance (ANOVA), Optimization.

"Optimization of Drilling Process Parameters Using Taguchi Method-A Review.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.4, Issue 8, page no.25-27, August-2017, Available :http://www.jetir.org/papers/JETIR1708006.pdf

"Optimization of Drilling Process Parameters Using Taguchi Method-A Review.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.4, Issue 8, page no. pp25-27, August-2017, Available at : http://www.jetir.org/papers/JETIR1708006.pdf