UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 4 Issue 10
October-2017
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR1710077


Registration ID:
170806

Page Number

458-462

Share This Article


Jetir RMS

Title

Optimization of Rotor Hub for Different Materials Using Ansys Software

Abstract

The rotor system is the revolving part of a helicopter which generates lift. This rotor consists of a mast, rotor blades, and hub. The mast is a hollow cylindrical metal shaft which extends in an upward direction from and is driven. Sometimes it is supported by the transmission also. On the top, a mast is the attachment point for the rotor blades (hub). The rotor blades are attached to the hub by different methods. Critical rotor systems are classified according to how they move relative to the main rotor hub and how the main rotor blades are attached. As the rotor starts spinning, each blade responds to inputs from the control system to enable helicopter control. The centre of lift on the whole rotor system proceeds in response to these inputs to impact pitch, roll, and move in upward motion. In this case, the rotor hub must carry aerodynamic forces and the blade weight as rotational speeds. For that of helicopter rotor hub strength will be calculated. In this project, the 3d model of helicopter main rotor hub shall be done in Unigraphics and imported into ansys software to perform static analysis to analyse the strength of rotor hub and optimise by using different materials

Key Words

Rotor Hub, Von Mises Stresses, Unigraphics, Aerodynamic Forces

Cite This Article

"Optimization of Rotor Hub for Different Materials Using Ansys Software", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.4, Issue 10, page no.458-462, October-2017, Available :http://www.jetir.org/papers/JETIR1710077.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Optimization of Rotor Hub for Different Materials Using Ansys Software", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.4, Issue 10, page no. pp458-462, October-2017, Available at : http://www.jetir.org/papers/JETIR1710077.pdf

Publication Details

Published Paper ID: JETIR1710077
Registration ID: 170806
Published In: Volume 4 | Issue 10 | Year October-2017
DOI (Digital Object Identifier): http://doi.one/10.1717/JETIR.17066
Page No: 458-462
Country: HYDERABAD, TELANGANA, India .
Area: Science & Technology
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0003296

Print This Page

Current Call For Paper

Jetir RMS