• Zeyad Katab
• Ali Musa

Abstract—The purpose of hot mix asphalt (HMA) pavement is to serve the transportation, and provide smooth surface over which vehicles can move safely. However, at certain period of time, many problems such as rutting, fatigue failure, and low skid resistance have been arisen due to its poor performance in term of temperature sensitivity and an increase in traffic loading. Using of waste materials in road pavements is nowadays considered. Due to the widely using of glass in our daily life, and a large amount of waste glass is generated annually; waste glass has been used in the road construction as an alternative to the aggregates in the HMA. This study aims to produce HMA using waste glass by SuperPave method. Also, indirect tensile (IDT) strength test has been performed on HMA with crushed glass, and without glass. Different percentages of crushed glass materials of 7%, and 20.5% were used. Crushed glass used in asphalt concrete with maximum size of 4.75 mm. The study shows that the tensile strength increases as the increase in the size and percentage of the crushed glass.

Indirect tensile strength, glass, sulphate, SuperPave, HMA.

"Evaluation of SuperPave Indirect Tensile Strength of HMA with Waste Glass", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 1, page no.257-260, January-2018, Available :http://www.jetir.org/papers/JETIR1801049.pdf

"Evaluation of SuperPave Indirect Tensile Strength of HMA with Waste Glass", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 1, page no. pp257-260, January-2018, Available at : http://www.jetir.org/papers/JETIR1801049.pdf