• Hetal Gorasiya
• Dr. K.V. Maheshwari
• Mr. Dipesh Pindoriya

This paper is based on the study on utilization of industrial waste sand in concrete. Waste sand requires large area for the disposal by open dumping. In this paper, we are going to replace natural sand with industrial waste sand in different percentage like, 0% , 10%, 20%, 30%, 40%, 50% &60%. We will conduct workability tests- slump test & compaction factor test for M30, M45 & M60 grade of concrete. We will check harden properties of concrete with different tests like compression test, split tensile test & flexural test. Also the durability of concrete will be tested with acid attack, sulphate attack, water absorption test. The main aim of this study is to find optimum percentage of utilization of industrial waste sand in concrete.

Industrial Waste Sand; Literature review; etc…

"A Study On Properties Of Concrete Using Industrial Waste Sand As Partial Replacement Of Fine Aggregate: A Critical Review", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 2, page no.950-953, February-2018, Available :http://www.jetir.org/papers/JETIR1802166.pdf

"A Study On Properties Of Concrete Using Industrial Waste Sand As Partial Replacement Of Fine Aggregate: A Critical Review", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 2, page no. pp950-953, February-2018, Available at : http://www.jetir.org/papers/JETIR1802166.pdf