UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 5 Issue 10
October-2018
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR1810678


Registration ID:
189907

Page Number

476-480

Share This Article


Jetir RMS

Title

Design And Analysis Of Single Point Cutting Tool By Using ANSYS R15.0

Abstract

The cutting forces at single point cutting tool-tip interface is determined, generated in high-speed machining operations. An investigation of cutting forces acting on the tool is carried out by subjecting it to the maximum possible working stress during a cutting operation. It is also determined that change in cutting speed and depth of cut has the maximum effect on increasing cutting forces. By varying the material the effect of those on cutting forces are compared with the theoretical results and FEA results. In this report, an FEM simulation technique is utilized to investigate the physical cutting and deformation of tip of single point cutting tool under the influence of cutting forces.

Key Words

Shear area, Young’s Modulus, Young’s Modulus, Thrust force, Shear Force, Overall correlation, Section modulus, Ansys R15.0.

Cite This Article

"Design And Analysis Of Single Point Cutting Tool By Using ANSYS R15.0", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 10, page no.476-480, October-2018, Available :http://www.jetir.org/papers/JETIR1810678.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Design And Analysis Of Single Point Cutting Tool By Using ANSYS R15.0", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 10, page no. pp476-480, October-2018, Available at : http://www.jetir.org/papers/JETIR1810678.pdf

Publication Details

Published Paper ID: JETIR1810678
Registration ID: 189907
Published In: Volume 5 | Issue 10 | Year October-2018
DOI (Digital Object Identifier):
Page No: 476-480
Country: Hassan, KARNATAKA, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0003017

Print This Page

Current Call For Paper

Jetir RMS