• MURTHI MAHADEVA NAIK G
• Naveen Kumar S K

This paper introduces the Printed Monopole Antenna (PMA) with an E – shaped patch to enhance the bandwidth for Ultra-wideband (UWB) applications. The conventional PMA is designed with a centre frequency of 6.77 GHz. The patch of conventional PMA is modified using three rectangular slots etched on patch, the slot dimensions are varied, moved to form different patterns and finally for E – shape the band width has been enhanced to cover UWB (3.1 GHz to 10.6 GHz) and excellent broadside radiation. The dimension of the E – shaped patch is finalized through optimization. The proposed PMA is designed and simulated using High Frequency Structure Simulator (HFSS). The conventional PMA and proposed PMA have been fabricated using commercially available low-loss dielectric material FR4 with dielectric constant 4.4. The conventional PMA and proposed PMA’s parameters is measured using vector network analyzer (VNA) and its radiation pattern is measured in anechoic chamber. The simulated and measured results were almost similar.

Printed Monopole Antenna, Defected Microstrip Surface, Ultra-wide band, Vector Network Analyzer.

"Design and Implementation of Microstrip fed E–Shaped Defected Microstrip Surface Printed Monopole Antenna for Ultra Wideband Applications ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 12, page no.423-433, December-2018, Available :http://www.jetir.org/papers/JETIR1812A57.pdf

"Design and Implementation of Microstrip fed E–Shaped Defected Microstrip Surface Printed Monopole Antenna for Ultra Wideband Applications ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 12, page no. pp423-433, December-2018, Available at : http://www.jetir.org/papers/JETIR1812A57.pdf