UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 0 Issue 0
June-2022
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR18IC059


Registration ID:
181400

Page Number

0

Share This Article


Jetir RMS

Title

Design and Fabrication of Tension Creep Testing Machine

Abstract

This experiment uses existing mechanically operated tensile and creep testing was modified to a low cost, electro-mechanically operated creep testing machine capable of determining the creep properties of aluminium and thermoplastic materials as a function of applied stress, time and temperature. The modification of the testing machine was necessitated by having an electro-mechanically operated creep testing machine as a demonstration model ideal for use and laboratory demonstrations, which will provide an economical means of performing standard creep experiment. Creep is a slow extension of a material in response to a comparatively low stress. Under a constant load, extension of the material results in a reduction in cross section, so stress increases under constant load. The higher the stress, the higher the creep rate until failure finally occurs. In metal, creep can occur at any temperature higher than approximately half the absolute melting point (Celsius melting point + 273). Thus, creep is not a problem for common metals used at ordinary temperature. The aim of this experiment is to study the effect of uniaxial loading on creep deformation by characterizing the study-state creep behaviour of any material at room temperature.

Key Words

Creep, stress, temperature, time, load, laboratory experiment.

Cite This Article

"Design and Fabrication of Tension Creep Testing Machine", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.0, Issue 0, page no.0, June-2022, Available :http://www.jetir.org/papers/JETIR18IC059.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Design and Fabrication of Tension Creep Testing Machine", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.0, Issue 0, page no. pp0, June-2022, Available at : http://www.jetir.org/papers/JETIR18IC059.pdf

Publication Details

Published Paper ID: JETIR18IC059
Registration ID: 181400
Published In: Volume 0 | Issue 0 | Year June-2022
DOI (Digital Object Identifier):
Page No: 0
Country: nagpur, Maharashtra, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

000273

Print This Page

Current Call For Paper

Jetir RMS