• Santosh G. Kadhao
• Manish S. Tarare
• Gautam C. Zade
• Kartik S. Rajgire

Constructed Wetlands (CW) are engineered wastewater treatment systems filled with porous media and planted with emergent wetland plants. The aim of this study was to analyze the phyto removal effectiveness by Typha angustata and Phragmites australis to treat wastewater effluent in CW systems as vertical flow subsurface treatment. Low cost waste water treatment method for different sources of waste water being an alternative to conventional wastewater treatment method that have operational and financial restriction. The role of materials, plants and composition microorganisms have shown as an indication of a better rate of degradation. Water contamination is a major problem world is facing today and the kitchen waste is one of the important factors. It is found that phytoremediation is one of the effective methods for the removal of pollutants from water and soil. Phytoremediation consist of media beds, plants, micro-organisms which is mainly depends on physical, chemical and biological activity to remove the contaminants. Wastewater treatment by constructed wetland granted in a developing country. It is performed for the removal of biochemical oxygen demand, chemical oxygen demand, suspended solid, ammonia and nitrogen from pre-treated domestic wastewater, the treatment of wetland carry under two hydraulic loading the BOD reduce by 41 - 58% in organic loading. Phragnites Australis, Canna, Typha,Reed, lotifolia are the plant used successfully in CW.

Constructed Wetland, Phyto-remediation, cana-indica, seasonal variation, Artificial wetland.

"REMOVE WASTEWATER IMPURITIES BY CW METHOD", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 5, page no.655-658, May-2018, Available :http://www.jetir.org/papers/JETIR18IC117.pdf

"REMOVE WASTEWATER IMPURITIES BY CW METHOD", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 5, page no. pp655-658, May-2018, Available at : http://www.jetir.org/papers/JETIR18IC117.pdf