• Vrushank R. Wankhade
• musa s. sayyad
• Satish T. Rathod
• Nayana Manohari T.K

Weather alternate and environmental loss has ended up the maximum fundamental function in each year. Green and sustainable materials in any enterprise are helpful. Glass is extensively used materials within the international a good way to reduce the waste glass, it has to be reused. The provision of river sand has grown to be regarding difficulty. The purpose of this venture painting is to look at the effects of using waste glass as a sectional replacement for high-quality mixture and metallic slag as a sectional replacement of coarse combination. Mixes had been prepared through converting the share for beaten waste glass. The waste glass used to alter pleasant aggregate inside the proportions of 0%, 10%, 20%, 30%, 40%, 50%. The belongings of compressive strength have been checked on this paper. Approximately 800 Mt of raw metallic and a median of about 400Kg of strong through products are generated in the metallic industry per ton of uncooked steel. The prevailing research deals with the usage of steel slag as a partial alternative coarse mixture. The metal slag turned into changed as a partial alternative of coarse mixture in the percentage of 0%, 10%, 20%, 30%, 40%, 50%, 60%, 70% and 80%. Compressive electricity of concrete has been taken and studied. It has been made by using changing each fines mixture and coarse combination via waste glass waste and metal slag respectively and studying the compressive strength of concrete.

Steel slag, waste glass, manufacturing sand, Natural sand, Compressive strength, Experimental, Investigation, Coarse Aggregate, Concrete

"Partial replacement of metal steel slag & waste glass with coarse aggregate & fine aggregate.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 6, page no.185-190, June-2019, Available :http://www.jetir.org/papers/JETIR1906809.pdf

"Partial replacement of metal steel slag & waste glass with coarse aggregate & fine aggregate.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 6, page no. pp185-190, June-2019, Available at : http://www.jetir.org/papers/JETIR1906809.pdf