• B.Krishnasanthosh
• Mr. Alok kumar
• B.Venkatesh
• V.Kishore

High exploitation rates and low recovery rates quickly deplete global natural resources, increasing the risk of global warming and pollution. In recent years, the development of polymer composites Reinforced with natural fibers such as jute, bamboo, linen, sisal, hemp, and the coir has become increasingly important. Natural fiber, commonly used in most parts of the world, requires minimal financial input and maintenance. Environmentally friendly and economical for polymer composites reinforced with synthetic fibers. However, composites reinforced with natural fibers have low water absorption and may not meet the requirements of specific applications. Due to this problem, natural fibers can be combined with synthetic fibers having the same matrix material to obtain the greatest advantage in improving its properties. In this case, hybrid composites made from natural fiber and fiber-reinforced polymer composites are very important for current needs. This article discusses the mechanical properties of bidirectional bamboo reinforced fibers and epoxy hybrid composite elements. Mechanical properties such as impact strength, flexural strength, and moisture absorption are evaluated experimentally following ASTM standards. Conclusions are drawn from the results of the experiment.

bamboo, fiberglass, epoxy

"MECHANICAL PROPERTIES EVALUATION OF HYBRID POLYMER COMPOSITES WITH BAMBOO AND E-GLASS FIBER PRODUCED BY HAND LAY-UP PROCESS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 3, page no.1535-1543, March-2020, Available :http://www.jetir.org/papers/JETIR2003223.pdf

"MECHANICAL PROPERTIES EVALUATION OF HYBRID POLYMER COMPOSITES WITH BAMBOO AND E-GLASS FIBER PRODUCED BY HAND LAY-UP PROCESS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 3, page no. pp1535-1543, March-2020, Available at : http://www.jetir.org/papers/JETIR2003223.pdf