JETIREXPLORE- Search Thousands of research papers



Published in:

Volume 7 Issue 7
July-2020
eISSN: 2349-5162

Unique Identifier

JETIR2007114

Page Number

937-943

Share This Article


Title

Modification of Manufacturing Process of Kingpin for Steering Assembly of Heavy Motor Vehicles and its Analysis

ISSN

2349-5162

Cite This Article

"Modification of Manufacturing Process of Kingpin for Steering Assembly of Heavy Motor Vehicles and its Analysis", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 7, page no.937-943, July-2020, Available :http://www.jetir.org/papers/JETIR2007114.pdf

Abstract

Conventional design of kingpin comes with a cross hole in the center of pin. But when the vehicle got loaded and travelled across hilly areas it was found that vehicle developed field failure from the center of kingpin. This was due to low core hardness required in the cross-hole area. In the proposed design this cross hole is eliminated which was used only for greasing. By eliminating this cross-hole manufacturing cost also got reduced and improved lead of manufacturing also. New kingpin without cross-hole is manufactured using standard manufacturing techniques which includes process flow diagrams and PFMEA. Nondestructive testing of new design of kingpin is also conducted using MPI testing

Key Words

Kingpin, MPI testing, PFD, PFMEA

Cite This Article

"Modification of Manufacturing Process of Kingpin for Steering Assembly of Heavy Motor Vehicles and its Analysis", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 7, page no. pp937-943, July-2020, Available at : http://www.jetir.org/papers/JETIR2007114.pdf

Publication Details

Published Paper ID: JETIR2007114
Registration ID: 235143
Published In: Volume 7 | Issue 7 | Year July-2020
DOI (Digital Object Identifier):
Page No: 937-943
ISSN Number: 2349-5162

Download Paper

Preview Article

Download Paper




Cite This Article

"Modification of Manufacturing Process of Kingpin for Steering Assembly of Heavy Motor Vehicles and its Analysis", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 7, page no. pp937-943, July-2020, Available at : http://www.jetir.org/papers/JETIR2007114.pdf




Preview This Article


Downlaod

Click here for Article Preview