• Madan M N
• Harshavardhan G K
• Dr.Hanumantharayagouda M Biradar

Termed as Rapid prototyping (RP), it is a phenomenal technique accustomed for instantly fabricating a sample, or a reference model of an assembly or a mere individual part by the means of data obtained from the 3D computer aided design (CAD). This can be further categorized into various systems, but in general into 3 mainline systems namely, solids, liquids and paste. Among these types of systems, the RP that is based on solids are widely used due to their ability of making certain unusual and difficult geometries feasible. Additive manufacturing, as the name suggests build 3D objects, by the virtue of layer by layer additions, and has potential to create any sort of geometries and shapes. One of the most prominent and economical additive manufacturing technique is the Fused Deposition Modeling (FDM) or Fused Filament Fabrication. In the current review paper, exclusive detailing of the technical aspects regarding technique and its description has been attempted.

Additive Manufacturing, Fused Deposition Modeling (FDM), Rapid Prototyping (RP).

"An Overview: Fused Deposition Modeling Process", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 7, page no.2115-2119, July-2020, Available :http://www.jetir.org/papers/JETIR2007270.pdf

"An Overview: Fused Deposition Modeling Process", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 7, page no. pp2115-2119, July-2020, Available at : http://www.jetir.org/papers/JETIR2007270.pdf