UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 7 Issue 7
July-2020
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR2007423


Registration ID:
235552

Page Number

977-986

Share This Article


Jetir RMS

Title

DESIGN AND ANALYSIS OF EOT CRANE HOOK WITH DIFFERENT MATERIALS USING FEM

Abstract

A crane is lifting machinery, discontinuous movement aimed at raising and distributing loads in space, suspended from a hook. Cranes available in the market are grinder travelling crane, overhead travelling crane, jib cranes, wire rope hoist, and EOT cranes. The EOT cranes are one of the most important mechanical components in the heavy weight lifting and loading in to cargos, into trains, in to heavy truck vehicles, etc. Different types of EOT cranes available in the industries are container cranes, workstation EOT cranes (or) light weight mobile EOT cranes and semi EOT cranes. These vase verity of EOT cranes are differed based on the tonnages and area to be covered for lifting and moving the weights The workstation EOT crane is the most economical solution in all those places where it is desired or civil works or expensive fixed mount metal structures, and where necessary make loading (or) unloading on a regular basis and at points different. In our project, first, three dimensional geometry of the workstation EOT crane is built in, CATIA. Then analysis of different cross sections, the part which is used to carry the loads in EOT crane, is carried out by using finite element method in ANSYS software for maximum loads Apply on crane hook. Using materials in this project structural steel, Ni-Cr steel, ASTM Grade 60 steel , Stainless steel. We observing von-missies stresses, Shear stress, and deflections generated from static analysis in ANSYS 15.0. finally concluded the suitable material on these 4 materials and which cross section is better design for crane hook.

Key Words

CATIA, ANSYS, Structural steel, Ni-Cr steel, ASTM Grade 60 steel , Stainless steel.

Cite This Article

"DESIGN AND ANALYSIS OF EOT CRANE HOOK WITH DIFFERENT MATERIALS USING FEM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 7, page no.977-986, July 2020, Available :http://www.jetir.org/papers/JETIR2007423.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"DESIGN AND ANALYSIS OF EOT CRANE HOOK WITH DIFFERENT MATERIALS USING FEM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 7, page no. pp977-986, July 2020, Available at : http://www.jetir.org/papers/JETIR2007423.pdf

Publication Details

Published Paper ID: JETIR2007423
Registration ID: 235552
Published In: Volume 7 | Issue 7 | Year July-2020
DOI (Digital Object Identifier):
Page No: 977-986
Country: West Godavari, Andhra Pradesh, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0003245

Print This Page

Current Call For Paper

Jetir RMS