• Rahul Kajabe
• Omkar Gunjal
• Vishal Gupta3
• Swapnil Godase
• Manish Gorde

This project deal with design, development and fabrication of “Development of multipurpose machine”. This machine is designed for the purpose of multi-operations i.e. drilling, cutting and grinding. This machine perform multipurpose operation at same lime with required speed & this machine is automatic which is controlled or operated which is run with the help of current. This machine is based on the mechanism of scotch yoke. The project aims at designing and developing a multipurpose machine tool which is capable of performing multiple tasks simultaneously. The machine is operated by giving drive to the main shaft to which worm gear mechanism is directly attached; worm gear mechanism is used for sawing operation. On the main shaft bevel gear mechanism was used for transmitting power. These bevel gears are used to transmit motion in the radial direction and drives drilling centre. The Grinding wheel is directly connected to the motor shaft. This model facilitates to complete three operations simultaneously with a single power source. This model of the multi operational machine is may be used in industries and domestic operation which can perform mechanical operation like drilling, cutting & shaping of a thin by motor metallic as well as wooden model or body.

Scotch Yoke mechanism, bevel gears, drilling, grinding

"Design and Development of Multipurpose Machine", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 2, page no.130-132, February-2019, Available :http://www.jetir.org/papers/JETIRAE06030.pdf

"Design and Development of Multipurpose Machine", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 2, page no. pp130-132, February-2019, Available at : http://www.jetir.org/papers/JETIRAE06030.pdf