UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 5 Issue 9
September-2018
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIRB006018


Registration ID:
185928

Page Number

78-82

Share This Article


Jetir RMS

Title

Analysis & comparison of RC frame building in different seismic & wind zone (As per IS 1893 part -I & IS 875 part-III 2015)

Abstract

Our study is based on non-linear structures type building which is carried out on mainly three different zone 3, 4 and 5. The analysis is done on Staad.Pro software. And as per Indian stander IS 875 part III 2015 and IS 1993 part I 2016 are using .The building model in the study has two structures one is ground + five (G+5) storey building and the second is ground+ ten (G+10) storey building. Twelve models are used to analyze with same length, width and same floor height. The depth of beam is also same. The objective of the present work is to study the behavior of a multi storied building irregular in plan subjected to wind load and earthquake load by adopting response spectrum analysis. In this study we have thoroughly done the comparison between earthquake load and wind load on the basis of storey height and in different zones which totally depends on the values of shear force, bending moment and deflection. The work I have performed here tells about the difference between the wind load and earthquake load in different zones according to deflection, shear force and bending moment. The deflection values of these loads in different zones vary a little and negligible. The same thing happens with the bending moment and shear force the values increases and decreases at each upper floor levels. The minimum deflection values of all these loads are equal to zero and maximum values of some wind loads differ with little values from earthquake load. Structural engineers are facing the challenge of striving for the most efficient and economical design solution while ensuring that the final design of a building must be serviceable (deflection), flexure for its intended function. When a structure is subjected to earthquake, it responds by vibrating. An earthquake force can be resolved into three mutually perpendicular directions- the two horizontal directions (x and y) and the vertical direction (z)It is very essential to consider the effects of lateral loads induced from wind and earthquake in the analysis for high rise building.

Key Words

Wind zone, Earthquake load, Shear force, Bending moment, Deflection

Cite This Article

"Analysis & comparison of RC frame building in different seismic & wind zone (As per IS 1893 part -I & IS 875 part-III 2015)", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 9, page no.78-82, September-2018, Available :http://www.jetir.org/papers/JETIRB006018.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Analysis & comparison of RC frame building in different seismic & wind zone (As per IS 1893 part -I & IS 875 part-III 2015)", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 9, page no. pp78-82, September-2018, Available at : http://www.jetir.org/papers/JETIRB006018.pdf

Publication Details

Published Paper ID: JETIRB006018
Registration ID: 185928
Published In: Volume 5 | Issue 9 | Year September-2018
DOI (Digital Object Identifier):
Page No: 78-82
Country: Udaipur, Rajasthan, India .
Area: Science & Technology
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0002942

Print This Page

Current Call For Paper

Jetir RMS