ISSN: 2349-5162

JETIREXPLORE- Search Thousands of research papers



Published in:

Volume 5 Issue 7
July-2018
eISSN: 2349-5162

Unique Identifier

JETIRC006382

Page Number

415-419

Share This Article


Title

REDESIGN & FINITE ELEMENT ANALYSIS OF INJECTION MOLDING MACHINE STATIONARY PLATEN

ISSN

2349-5162

Cite This Article

"REDESIGN & FINITE ELEMENT ANALYSIS OF INJECTION MOLDING MACHINE STATIONARY PLATEN ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 7, page no.415-419, July-2018, Available :http://www.jetir.org/papers/JETIRC006382.pdf

Authors

Abstract

Stationary platen is a critical component of plastic injection molding machine. During clamping of molds, force is produced against the face of platen which will result in deformation of platen concavely. The platen also includes tie bars at each corner. As a result of bending of the platen, tie bars also resulting in uneven loading. The uneven loading results the premature failure of tie bar which can lead to the breakdown of the machine. The paper includes improvement in the design i.e. to eliminate the dome shape of 910 Ton stationary platen and make it flat, also increase injection unit entrance hole diameter and optimize the modified model. The work presented includes finite element analysis, fatigue analysis, design modifications and optimization of Injection Molding Machine Stationary Platen. For 910T, finite element analysis is carried out and stress value is compared with acceptance criteria. For finite element based fatigue analysis of 910T, the life of platen checked for design life. For improvement in design modification is carried out. After design modifications, finite element analysis and fatigue analysis is carried out and checked with an acceptance limit of stress and design life.

Key Words

Injection molding machine, finite element analysis, fatigue analysis, Stationary platen, and Design modifications

Cite This Article

"REDESIGN & FINITE ELEMENT ANALYSIS OF INJECTION MOLDING MACHINE STATIONARY PLATEN ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 7, page no. pp415-419, July-2018, Available at : http://www.jetir.org/papers/JETIRC006382.pdf

Publication Details

Published Paper ID: JETIRC006382
Registration ID: 184613
Published In: Volume 5 | Issue 7 | Year July-2018
DOI (Digital Object Identifier):
Page No: 415-419
ISSN Number: 2349-5162

Download Paper

Preview Article

Download Paper




Cite This Article

"REDESIGN & FINITE ELEMENT ANALYSIS OF INJECTION MOLDING MACHINE STATIONARY PLATEN ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 7, page no. pp415-419, July-2018, Available at : http://www.jetir.org/papers/JETIRC006382.pdf




Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0001282

Print This Page

Current Call For Paper