• Bilji C mathew
• JV Muruga Lal Jeyan

This experimental study investigates the wear analysis of brake pad and disc of an automobile on Pin on Disc experimental setup. The brake pad consisting of silicon carbide and many other binding and filling materials is stamped with the Graphene nanoplatelet and even the graphene nanoplatelet is being mixed with the Cast iron which is usually used as Disc for braking assembly of an automobile consisting of Disc Brake Mechanism. The pins for the experimental purpose were made from the regular commercial brake pad and Stamped brake pad. We found that the surface heating results in the early flow separation and is attributed to such behavior for Cl and Cd. Early flow separation leads to broaden the wake width and static pressure distribution around the airfoil modifies which eventually resulting in an increase in Cd and decrease in Cl on heating the airfoil surface.

Pin on Disc, Silicon carbide, Graphene Nanoplatelet, pins, discs, stamping

"EXPERIMENTAL WEAR ANALYSIS OF SILICON CARBIDE DISC BRAKE PAD ASSEMBLY", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 11, page no.744-750, November 2018, Available :http://www.jetir.org/papers/JETIRDS06111.pdf

"EXPERIMENTAL WEAR ANALYSIS OF SILICON CARBIDE DISC BRAKE PAD ASSEMBLY", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 11, page no. pp744-750, November 2018, Available at : http://www.jetir.org/papers/JETIRDS06111.pdf