• Anil B Ghubade
• Anil Kumar

The challenge associated with machining operation is the generation of large amount of heat. The heat generated raises the temperature of machining zone which adversely affect the machining performance in terms of failure of the tool , deterioration of surface finish, more power consumption, change in microstructure, low production rate. The reason behind high temperature is friction along the tool- chip interface and interaction between tool flank-machined surfaces. The effective and appropriate application of cooling can drastically reduces the temperature of machining zone which consequent into better machining performance. Therefore, the aim of this paper is to study the effect of nanolubrication in machining environment and how nanoparticles improve the machining performance.

Nanolubrication, types of lubrication, nanoparticles

"Investigation into the effect of nanolubrication in machining environment", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 1, page no.1846-1849, January 2019, Available :http://www.jetir.org/papers/JETIRDY06292.pdf

"Investigation into the effect of nanolubrication in machining environment", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 1, page no. pp1846-1849, January 2019, Available at : http://www.jetir.org/papers/JETIRDY06292.pdf