JETIREXPLORE- Search Thousands of research papers



Published in:

Volume 5 Issue 12
December-2018
eISSN: 2349-5162

Unique Identifier

JETIRDZ06043

Page Number

320-326

Share This Article


Title

Design and fabrication of a prototype micropump

ISSN

2349-5162

Cite This Article

"Design and fabrication of a prototype micropump", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 12, page no.320-326, December 2018, Available :http://www.jetir.org/papers/JETIRDZ06043.pdf

Authors

Abstract

Now a day’s demand of the micro pump is quite high in the field of medical and bio-technology. The micropump will supply the micro fluid. The micropump develop should posses some of the peculiar characteristics, such as flexibility, operates at low voltage, safety factor should be considered, reduced the chances of infection since it will fit inside the body. The reflexes should be good and precise. In this paper, a new approach is made to make a prototype model. Actually, it has to be made using shape memory alloy coil actuator. This actuator will act as a servo actuator for the micropump. The actual micropump consist of two inlet valves, casing to hold the pump and a pump chamber. The fabrication of the micro pump resembles the actual micropump which is able to make a flow of the suitable fluid. That will helpful or useful towards the medical application and in the field of biotechnology.

Key Words

3D modelling, Micropump, Double acting cylinder, electromagnet, solidwork

Cite This Article

"Design and fabrication of a prototype micropump", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 12, page no. pp320-326, December 2018, Available at : http://www.jetir.org/papers/JETIRDZ06043.pdf

Publication Details

Published Paper ID: JETIRDZ06043
Registration ID: 233493
Published In: Volume 5 | Issue 12 | Year December-2018
DOI (Digital Object Identifier):
Page No: 320-326
ISSN Number: 2349-5162

Download Paper

Preview Article

Download Paper




Cite This Article

"Design and fabrication of a prototype micropump", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 12, page no. pp320-326, December 2018, Available at : http://www.jetir.org/papers/JETIRDZ06043.pdf




Preview This Article


Downlaod

Click here for Article Preview