• R.Sainath

In this project we are used scotch yoke mechanism. Scotch yoke mechanism also called as slotted link mechanism. This mechanism using the principle is that the rotary motion of motor is convert in to linear motion by using the connecting rods and links. We are using this mechanism to operate the four hacksaws by the four sides with side by side. The main use of this project to cut different metal bar work pieces with high rate of accuracy to maximum utilization of ideal time. This project is able to cut the wood, flat plates, metal pipes, and other thin materials. This project of four side hacksaw machine is used for cut the metals with four sides in a single time or simultaneously. So the work efficiency of labour is high and productivity improves than the conventional hacksaw machine with low cost. The fabrication cost of four sides of power hacksaw machine is less.

Scotch yoke mechanism, Four side hacksaw

"FABRICATION OF FOUR SIDES POWER HACKSAW BY USING SCOTCH YOKE MECHANISM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 9, page no.618-623, September-2018, Available :http://www.jetir.org/papers/JETIRE006091.pdf

"FABRICATION OF FOUR SIDES POWER HACKSAW BY USING SCOTCH YOKE MECHANISM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 9, page no. pp618-623, September-2018, Available at : http://www.jetir.org/papers/JETIRE006091.pdf