UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 7 Issue 5
May-2020
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIREA06031


Registration ID:
231809

Page Number

148-152

Share This Article


Jetir RMS

Title

EXPERIMENTAL STUDY ON PARTIAL REPLACEMENT OF FINE AGGREGATE WITH MARBLE POWDER

Abstract

The experimental parameter was the percentage of granite powder substitution. The cubes and cylinders were prepared by 0 %, 5 %, 10 %, 15 %, 20 % and 25 % of fine/natural aggregate substituted by the GP by-product. To fully understand the influence of GP by-product on behavior of concrete, several tests such as density, slump cone, split tensile strength, flexural strength; Ultrasonic pulse velocity (UPV) and compressive strength tests have been conducted. The GP by-product showed a very high specific surface value of about 351 m2/kg and the chemical analysis results showed the examined material contains about 72.14 % of silica (Sio2), and 17.13 % of alumina. Experimental results revealed that, rough texture and high specific area of the GP by-product significantly decreased the workability of the concrete, especially for the substitution rate of 20 % and 25%. The obtained test results shows that the substitution of GP by-product up to 15 % does not affect the mechanical properties of the concrete and the substitution of beyond 15 % is not beneficial. However the determination of its durability properties will ensure the reliability of its usage in aggressive environments. With the intention, this study also focused to determine the influence of GP waste on the durability properties of concrete. The cubes and cylinders were prepared by 0 %, 5 %, 10 %, 15 %, 20% and 25 % of fine/natural aggregate substituted by GP waste. The experimental results were shown that substitution of granite and marble powder waste up to 15 % of any formulation of concrete is favorable form the normal concrete making and it is concluded that granite powder waste can be used as alternative aggregates for normal concrete. However, more research is needed to understand the flexural and axial behaviour of GP concrete in structural member scale. To fill this gap this research work intended to examine the structural aspects related to flexural and axial behaviour of reinforced concrete beam containing granite industry waste. From the test results obtained, it is recommended that the replacement of natural sand by the GP waste up to 15 % of any formulation is favorable for the concrete making without adversely affecting the structural behaviour of concrete

Key Words

Marble Powder, Different Test, Different Proportion Mix.

Cite This Article

"EXPERIMENTAL STUDY ON PARTIAL REPLACEMENT OF FINE AGGREGATE WITH MARBLE POWDER", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 5, page no.148-152, May 2020, Available :http://www.jetir.org/papers/JETIREA06031.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"EXPERIMENTAL STUDY ON PARTIAL REPLACEMENT OF FINE AGGREGATE WITH MARBLE POWDER", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 5, page no. pp148-152, May 2020, Available at : http://www.jetir.org/papers/JETIREA06031.pdf

Publication Details

Published Paper ID: JETIREA06031
Registration ID: 231809
Published In: Volume 7 | Issue 5 | Year May-2020
DOI (Digital Object Identifier):
Page No: 148-152
Country: -, -, - .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0003178

Print This Page

Current Call For Paper

Jetir RMS