• Puneet Sharma
• Rameshwar Cambow
• Himanshu Arora

In every year, there are millions of tonnes of fly ash produced from the thermal power plant. These fly ashes are already utilized to make economical Fly Ash bricks. But, these bricks are rarely used in house wall due to lower compressive strength as compare to burnt clay bricks. Also, the bonding strength in between mortar and fly ash bricks is not that strong enough to make it durable. Due to these reasons, it lowers the priority to choose a fly ash bricks. A feasibility study was undertaken to production of fly ash-based bricks with clay, wood ash, lime, gypsum and to increase the compressive strength of the bricks as well as bonding strength in between the bricks and mortar. The mortar composition was modified to make it more efficient. The compressive strength of the bricks, shear in between the bricks and mortar was carried out. It is expected that the compressive strength of the bricks will increase and the bonding strength in between the bricks and mortar will improve. Thus, their property will be modified.

Experimentation On The Usage Of Fly Ash In Brick Formation

"Experimentation On The Usage Of Fly Ash In Brick Formation", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 12, page no.573-581, December 2018, Available :http://www.jetir.org/papers/JETIREC06067.pdf

"Experimentation On The Usage Of Fly Ash In Brick Formation", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 12, page no. pp573-581, December 2018, Available at : http://www.jetir.org/papers/JETIREC06067.pdf