• Purvi Chauhan
• Krupang Panchal
• Vijay Baraiya
• Ankit Rathod

Casting is the type of manufacturing process where component is desired geometry is get acquire by either pouring liquid material into mould where flaws are sourced from insufficient mould characteristics or gating system. Casting defects is mainly root age from the ineffective gating system. Casting defects and their emplacement can be anticipated and extinguished by appropriate design of gating system and simulation. It saves both money and time because simulation gives optimal solidification parameter for specific casting component and eliminates any defect way before doing actual casting. Here a case of grate plate is discussed in detail

Gating system, feeding system, simulation, NRL

"Gating and Feeding System Design for Grate Plate and Simulation for Yield Reclamation", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 11, page no.1022-1026, November-2018, Available :http://www.jetir.org/papers/JETIRK006155.pdf

"Gating and Feeding System Design for Grate Plate and Simulation for Yield Reclamation", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 11, page no. pp1022-1026, November-2018, Available at : http://www.jetir.org/papers/JETIRK006155.pdf