UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 4 Issue 12
December-2017
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR1712033


Registration ID:
170994

Page Number

165-176

Share This Article


Jetir RMS

Title

Analysis of heat transfer rate by varying cooling fluid for engine cylinder fins.

Abstract

The Engine cylinder is one of the major automobile components, which is subjected to high temperature variations and thermal stresses. In order to cool the cylinder, fins are provided on the cylinder to increase the rate of heat transfer. By doing thermal analysis on the engine cylinder fins, it is helpful to know the heat dissipation inside the cylinder.The principle implemented in this project is to increase the heat dissipation rate by using the invisible working fluid, nothing but air. We know that, by increasing the surface area we can increase the heat dissipation rate, so designing such a large complex engine is very difficult. The main purpose of using these cooling fins is to cool the engine cylinder by air. The main aim of the project is to analyze the thermal properties by varying cooling fluid, material and thickness of cylinder fins. Parametric models of cylinder with fins have been developed to predict the thermal behavior. The models are created by the geometry, rectangular and also by varying thickness of the fins for both geometries. Cooling fluids used in this thesis is air, oil. The 3D modeling software used is Pro/Engineer.Thermal analysis is done on the cylinder fins to determine variation in temperature distribution. The analysis is done using ANSYS. Transient thermal analysis determines temperatures and other thermal quantities that vary over time. Presently Material used for manufacturing cylinder fin body is Aluminum Alloy 204 which has thermal conductivity of 110-150W/mk. We are analyzing the cylinder fins using this material and also using Aluminum alloy 6061 and Magnesium alloy which have higher thermal conductivities.

Key Words

ANSIS, CATIA,PRO-E

Cite This Article

"Analysis of heat transfer rate by varying cooling fluid for engine cylinder fins.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.4, Issue 12, page no.165-176, December-2017, Available :http://www.jetir.org/papers/JETIR1712033.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Analysis of heat transfer rate by varying cooling fluid for engine cylinder fins.", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.4, Issue 12, page no. pp165-176, December-2017, Available at : http://www.jetir.org/papers/JETIR1712033.pdf

Publication Details

Published Paper ID: JETIR1712033
Registration ID: 170994
Published In: Volume 4 | Issue 12 | Year December-2017
DOI (Digital Object Identifier):
Page No: 165-176
Country: Hyderabad/Ranga reddy, Telangana, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0003376

Print This Page

Current Call For Paper

Jetir RMS