• Salunkhe Mangesh Sanjay
• More Pawan Ashok
• Patil Shashikant Chotu
• Prof.Malpure Vinod A

Now a day’s PMSM (Permanent magnet synchronous motor) is widely used in high performance application such as industrial robots and machine tools because of its compact size, high power density, high air gap flux density, high torque capability and less maintenance. So PMSM has emerged as an alternative to Induction motor due to increasing energy saving demand.so we can achived speed control of PMSM using this method,and checking an output on output scope of simulation block. The speed control of PMSM in closed loop operation and to deals with existence of transient consider a PID control problem , based on common contole engineering knowledge. if the transient error is big,that good transient performance can be obtained by increasing the P and I gain and decreasing D gain.to autotune the control parameter of the PID controller, the Evolutionary algorithms are developed.

PMSM, PID

"Controlling Speed of PMSM Using PID Controller In MATLAB Simulation ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 5, page no.258-263, May-2018, Available :http://www.jetir.org/papers/JETIR1805467.pdf

"Controlling Speed of PMSM Using PID Controller In MATLAB Simulation ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 5, page no. pp258-263, May-2018, Available at : http://www.jetir.org/papers/JETIR1805467.pdf