UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 5 Issue 6
June-2018
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR1806496


Registration ID:
183956

Page Number

779-789

Share This Article


Jetir RMS

Title

Comparative Analysis of Electric Discharge Sawing Machining with Conventional Electric Discharge Machining

Abstract

Electric Discharge Sawing (EDS) Machining is similar to conventional Electric Discharge Machining (EDM) process, but extra reciprocating motion is given to the tool which enhances the flushing efficiency of the process which ultimately yields high MRR. Scotch yoke mechanism is used to generate reciprocating motion. There, still exist numerous difficulties in cutting advanced materials, super alloys and metal matrix composite materials. EDS is a competent sawing process for cutting difficult to cut materials. A modified setup has been designed and developed. The sawing process has been investigated with the developed setup. One-factor-at-time (OFAT) approach was used for experimentation. Experimental studies have been conducted on MMC with input parameters as current, pulse on time, pulse off time, gap voltage, lift, stroke length and rotational speed of disc, keeping other parameter constant. Material removal rate and tool wear rate of developed EDS process has been evaluated through standard test procedures. It has been found that the EDS process is quick as compared to the conventional cutting process. Now a days, there is massive demand of MMC shaft’s in automobile industry. EDS may be an effective way to cut keyways and other operation in MMC shafts.

Key Words

EDS, OFAT, MRR and TWR

Cite This Article

"Comparative Analysis of Electric Discharge Sawing Machining with Conventional Electric Discharge Machining", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 6, page no.779-789, June-2018, Available :http://www.jetir.org/papers/JETIR1806496.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Comparative Analysis of Electric Discharge Sawing Machining with Conventional Electric Discharge Machining", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 6, page no. pp779-789, June-2018, Available at : http://www.jetir.org/papers/JETIR1806496.pdf

Publication Details

Published Paper ID: JETIR1806496
Registration ID: 183956
Published In: Volume 5 | Issue 6 | Year June-2018
DOI (Digital Object Identifier):
Page No: 779-789
Country: Ferozepur, PUNJAB, INDIA .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0002939

Print This Page

Current Call For Paper

Jetir RMS