• I.uday kumar
• Sd.Abdul kalam
• P.Ravi kumar

The current study observes the effect of orientation on the mechanical properties of a Carbon/ E-Glass reinforced polymer based composites. Specimens we are investigated in this study are E-glass/carbon fiber with Polyester resin were prepared by using hand layup technique. The laminated specimens are cut to the ASTM standards. The samples are subjected to elongation & bending load and also the sudden loads causing tensile, flexural and impact stress in this study. The purpose of this work is to experimentally analysis the orientation of fiber in the Reinforced composites subjected to tensile, flexural and also the sudden loading. This project is divided into two phases, Firstly we are calculating the tensile properties of the composite are calculated at different carbon percentages for knowing which percentage of carbon having high reinforcement and also having the high properties. In this paper we are varying the Carbon percentage from 5% to 25% with an interval of 5% each. Secondly the composite is investigated for different fiber directions at constant carbon percentage. In this paper we are changing the direction of the Fiber as 0°, 30°, 45°, 60°, and 90° to investigate the tensile strength, flexural strength and impact strength of the composite.

: E-Glass/ Carbon Fiber, Fiber Direction, Carbon Percentage, Tensile, Flexural and Impact Strength

"Experimental study on the Mechanical Properties of E-Glass Reinforced Polymer Composite based on carbon nano powder percentage", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 8, page no.411-416, August-2018, Available :http://www.jetir.org/papers/JETIR1808811.pdf

"Experimental study on the Mechanical Properties of E-Glass Reinforced Polymer Composite based on carbon nano powder percentage", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 8, page no. pp411-416, August-2018, Available at : http://www.jetir.org/papers/JETIR1808811.pdf