• S. S. Gawade
• P. D. Darade
• D. N. Korade
• K. R. Jagtap

Adhesively bonding is a very pace fastening method that's convenient for joining superior lightweight sheet substances which can be varied and tough to weld. This joint is used recently because now a day we are going for lightweight application and it is very important for us to build such joint which will not only reduce its weight as per requirement but will also help in damping the vibrations. In this project we can grasp the effect of using neoprene rubber for joining two dissimilar metals, by making use of an industrial adhesive, which is very powerful. Adhesive bonds discover a large application in the field of aerospace and automotive industries. The natural frequency of the system increases with the increase in the overlap length of the joint. This tendency is logical because of the tendency of joint system to become stiff with increasing the overlap length. This particular truth can be used as a design tool to avoid a particular natural frequency.

Adhesive bond, Neoprene rubber, Lap joint, Vibrations.

"Vibration Analysis of Adhesively Bonded Single Lap Joint", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 9, page no.859-864, September-2018, Available :http://www.jetir.org/papers/JETIR1809635.pdf

"Vibration Analysis of Adhesively Bonded Single Lap Joint", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 9, page no. pp859-864, September-2018, Available at : http://www.jetir.org/papers/JETIR1809635.pdf