• Mirza Samim Matin
• Dr. (Prof.) Abhijit Pakira

Plywood industry is a conventional industry using mostly conventional process and the output that is generated i.e. plywood thus obtained become subjected to several failures since quality thus generated out of conventional manufacturing process parameters do not posses necessary quality parameters. Sine plywood is subjected to mechanical load, even sometimes sustained pulsating load etc. it becomes subjected to different types of failure. Out of different types of failure to which plywood is subjected, rapture failure is a very common one. Suitable quality management is necessary to eliminate such type of failure and TQM is an effective means towards this and TQM practices provide an effective contribution towards management of process parameters with necessary quality enhancement effect towards elimination of different types of failures like tensile failure, compressing failure, availability of suitable elastic limit, etc through DOE and above every aspect of quality management TQM creates situation in quality management having contribution over major effects in plywood manufacturing process through DOE: testing modules of rapture of finished plywood, very critical criteria, as response.

process parameters, quality circle, rapture, failures, DOE (design of experiment)

"Identification of process parameters contributing major effects in plywood manufacturing through DOE, an effective TQM Tool: Testing Modulus of Rapture of finished plywood as response", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 10, page no.674-683, October-2018, Available :http://www.jetir.org/papers/JETIR1810886.pdf

"Identification of process parameters contributing major effects in plywood manufacturing through DOE, an effective TQM Tool: Testing Modulus of Rapture of finished plywood as response", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 10, page no. pp674-683, October-2018, Available at : http://www.jetir.org/papers/JETIR1810886.pdf