• Prasad Ramesh Shinde
• Pavankumar Ravindra Sonawane

The scope of curve welding in various design areas, e.g. aviation, nuclear and submerged companies, is currently expanding over a few days. The traditional use of curve welding has also broadened its efficiency, expense, accuracy, and volume specifications. The methodological constraints are then required to enhance the existing welding process. Our key objective is to investigate with the assistance of TAGUCHI the progress of the Manual Metal Arc Welding Boundaries. The use of Manual Metal Arc Welding is used to include the aluminum combination illustration in this report. For example, current, voltage is taken as information borders by two boundaries of the Manual Metal Arc Welding. The elasticity can be tested by adjusting these limits. For rigidity with the aid of UTM is controlled. To accomplish the enhancements, MINITAB programming is required. Restricted component analysis (FEA) is an instrument used to assess warm anxieties and the distribution of temperatures by hand in the welded versions. The goal of the current work is to evaluate the transitory heat inspection in circular segment-weathered examples with a thickness of 5 mm and 200 mm x 50 mm.

FEA, Aluminum specimen, UTM, MINITAB

"Experimental and FEA analysis of optimizing parameter of welding specimen by MINITAB", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 8, page no.581-586, August-2020, Available :http://www.jetir.org/papers/JETIR2008073.pdf

"Experimental and FEA analysis of optimizing parameter of welding specimen by MINITAB", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 8, page no. pp581-586, August-2020, Available at : http://www.jetir.org/papers/JETIR2008073.pdf