• SHUBHAM RAM PATEKAR
• P.K. PARASE

Valve is a mechanical device which regulates either the flow or pressure of the fluid. Among the different types of valves, high pressure ball valve finds use in certain application like industrial hydraulics and marine hydraulics. The present study involves designing the high-pressure valve of nominal diameter 25mm. This project consists of design & analysis of trunnion mounted ball valve. The project work consists of verification of design of ball component of ball valve. In this project static analysis of ball component is carried out. The stress values are calculated from stress calculations manually first. Then to determine the stresses in software a 3D CAD model created in CATIA V5 software. Again, static analysis will be performed by Varying Shell Thickness and Fillet Radius of ball. The result from static analysis is compared with the experimental results. According to the result comparison if required the design changes suggested to the manufacturer.

Trunnion mounted ball valve, CATIA V5, Shell Thickness, Fillet Radius of ball.

"Static Analysis and Structural Optimization OF Trunnion Mounted Ball Valve by Varying Shell Thickness and Fillet Radius", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 8, page no.597-603, August-2020, Available :http://www.jetir.org/papers/JETIR2008075.pdf

"Static Analysis and Structural Optimization OF Trunnion Mounted Ball Valve by Varying Shell Thickness and Fillet Radius", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 8, page no. pp597-603, August-2020, Available at : http://www.jetir.org/papers/JETIR2008075.pdf