• Vineet Khandelwal
• Anil Kumar Rao

— In present analysis the T – branch shaped pipe was used with three materials steel, mild steel and aluminium to create T – branched pipe edges were chamfered in different angles i.e. 30, 60, 45, 72 degrees the lean mixture of gasoline was set to be flow inside the pipe, sensors were attached in on pipe to analyse the effect of over pressure. From this analysis it was found that mild steel pipe with 60 degree chamfered weld nugget has ability to resist higher over pressure compared to steel and aluminium, the numerical investigation was performed by using computational fluid dynamics analysis in fluent 15.0 domain for mild steel with 60 degree chamfered nugget weld the overpressure value converges the experimental values

Steel, Mild Steel, Welding, T – Branch Shaped, Aluminum, Pipe, Gasoline, Lean Mixture, Over Pressure.

"ANALYSIS OF GASOLINE FLOW INSIDE BRANCHED PIPE TO IMPROVED WALL SHEAR STRESS AND ACCESS PRESSURE WITH DIFFERENT MATERIALS USING DARCY WEISHBACH EQUATION", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.7, Issue 8, page no.846-855, August-2020, Available :http://www.jetir.org/papers/JETIR2008109.pdf

"ANALYSIS OF GASOLINE FLOW INSIDE BRANCHED PIPE TO IMPROVED WALL SHEAR STRESS AND ACCESS PRESSURE WITH DIFFERENT MATERIALS USING DARCY WEISHBACH EQUATION", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.7, Issue 8, page no. pp846-855, August-2020, Available at : http://www.jetir.org/papers/JETIR2008109.pdf