• Bala Venkata Praveen Inala
• Kalpana Saini

The effects of operating the condition on Fenton oxidation processes is such as hydrogen peroxide and iron concentration were investigated. FACCO process as a treatment can be a good option for to be increase biodegradability of the chemical industrial wastewater. The optimum dosage ratio of the [Fe2+] & [H2O2] will be finalize the based on experiment while the optimum pH was from 2.4 to 3.4, a treatment technique , known as the Fenton Activated Carbon Catalytic Oxidation (FACCO) ,consisting of the coagulation-flocculation using alum, lowering of pH was from 2.4 to 3.4 using the sulphuric acid, chemical dosed with hydrogen peroxide and the Ferrous sulphate (Fenton reagent), The lab scale model suggested to be that the rate of reaction was highly affected by the concentration of the hydrogen peroxide. Treatment of such waste had always been difficult because of the presence of refractory organic pollutants such as different types of organic dye. In this study, treatment of chemical effluent was carried out using combined system of Fenton oxidation process followed by adsorption on granular activated carbon (GAC). In addition, the lab-scale study of the adsorption process was elaborated. The lab scale model is suggested that the rate of reaction was the highly affected by the concentration of hydrogen peroxide. Moreover, the results indicated that the treatment module was very efficient in removing the organic pollutant.

FACCO, Ferous sulphate, Fenton, H2O2, Effluent treatment, Chemical industry, Advamced Oxidation

"Treatment of Chemical Industry Effluent by FACCO Treatment", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 3, page no.2431-2437, March-2021, Available :http://www.jetir.org/papers/JETIR2103303.pdf

"Treatment of Chemical Industry Effluent by FACCO Treatment", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 3, page no. pp2431-2437, March-2021, Available at : http://www.jetir.org/papers/JETIR2103303.pdf