• ANSTEY VATHANI T
• MR. VIMAL D

The study is based on the replacement materials such as copper slag, GGBS and addition of thermocol balls and steel fibre. This study is focused on two major things such as paver blocks and beam with the dimensions 260x110x80mm and 1200 x 150x 230 mm.M40 grade is used for paver block which is casted with addition of copper slag, GGBS to its weight with 1% of thermocol balls .M30 grade is used for cube and beam which is casted with addition of copper slag, GGBS to its weight with 1% steel fibre. When paver blocks are considered the proportions used for copper slag are 10%,20%,30%,40%,50%,60%,70%,80%,90% and 100% and with GGBS kept constant with 30%. When cubes are considered the proportions used for copper slag are 25%,50%,75% and 100% and with GGBS kept constant with 40%.the beam is casted with the strength that is tested with the hardened cube. Therefore 25% of copper slag .40% of GGBS and 1% of steel fibre is casted into Beam. Various tests are conducted for each such as compressive strength test, water absorption test and flexural behaviour for beam.

Copper Slag, GGBS, Steel Fibre, Thermocol Balls, Cube, Paver Blocks, Beam, Bi-Arc

"AN EXPERIMENTAL INVESTIGATION ON PARTIAL REPLACEMENT OF COPPER SLAG AS FINE AGGREAGTE IN PAVER BLOCK AND BEAM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 4, page no.237-244, April-2021, Available :http://www.jetir.org/papers/JETIR2104033.pdf

"AN EXPERIMENTAL INVESTIGATION ON PARTIAL REPLACEMENT OF COPPER SLAG AS FINE AGGREAGTE IN PAVER BLOCK AND BEAM", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 4, page no. pp237-244, April-2021, Available at : http://www.jetir.org/papers/JETIR2104033.pdf