• Sunil Kumar Dehariya
• Dr Ashish Manoria
• Dr Pankaj Agarwal

3D Printing or additive manufacturing is one of most potential fabrication method used in each sector of our daily life. Easily modified design, material saving and the capacity to fabricate complex structures, just as quick prototyping, are the principle advantages of 3D printing. One of the major advantage of this technology to fabricate different products in small quantities. A few imperfections that are causing huge impact on 3D printed models which corrupt the nature of the item. Henceforth to deal with these imperfections, distinctive measurement methods are expected to measure the deformities that are seen on the outside of 3D-printed models. The essential rationale of this exploration work is to introduce distinctive measurement method to measure the surface deformities shaped on the 3D printed models. Potential ways for this research work incorporates gathering faulty examples from sources and learn about the imperfections. On the basis of present review, I choose to identify surface defects and minimize the defects of FRP (Fiber Reinforced Polymers) PLANTERS manufactured by FDM Printing method. This research work concentrates a portion of the various techniques that can be executed to gauge the surface deformities on the 3D printed models. The causes for the defects on the products will be evaluated. The outcomes will recommend distinctive strategy for the imperfections to be estimated.

Surface imperfections, Planters, FDM, 3D Printing.

"“A REVIEW ON SURFACE IMPERFECTIONS IN 3D PRINTED PRODUCTS”", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 4, page no.714-720, April-2021, Available :http://www.jetir.org/papers/JETIR2104099.pdf

"“A REVIEW ON SURFACE IMPERFECTIONS IN 3D PRINTED PRODUCTS”", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 4, page no. pp714-720, April-2021, Available at : http://www.jetir.org/papers/JETIR2104099.pdf