UGC Approved Journal no 63975

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 9 | Issue 1 | January 2022

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 8 Issue 7
July-2021
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR2107313


Registration ID:
312486

Page Number

c348-c360

Share This Article


Jetir RMS

Title

DESIGN OF WHEEL RIM BY USING DESIGN OF EXPRIMENTS

Abstract

Main objective is to analyze the reason of failures of the rim. Mainly the cracks on the surface, bending due to impact loading. Vibration and the hold pressure of the tire can damage the rim. The damage such as rust, dents, etc. which results in increased vibration while running, loss of air pressure and even sometimes the complete structural failure. This can damage the rims which could result in failure of the Rim during running conditions. Changes can be made to a rim and visible damage could lead to greater damage which can’t be seen by naked eye, so a repaired rim will never be structurally sound as original rim. There are some more causes of failure, this project will discuss about these failures which can arise in rim. This project is all about the design, analysis and calculation of von-mises stresses and deflections with the help of ANSYS. The part which is under maximum stress as well as respective deformation value can be easily detected.

Key Words

Cracks, Vibration, Air pressure, von-mises stresses, ANSYS

Cite This Article

"DESIGN OF WHEEL RIM BY USING DESIGN OF EXPRIMENTS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 7, page no.c348-c360, July-2021, Available :http://www.jetir.org/papers/JETIR2107313.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"DESIGN OF WHEEL RIM BY USING DESIGN OF EXPRIMENTS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 7, page no. ppc348-c360, July-2021, Available at : http://www.jetir.org/papers/JETIR2107313.pdf

Publication Details

Published Paper ID: JETIR2107313
Registration ID: 312486
Published In: Volume 8 | Issue 7 | Year July-2021
DOI (Digital Object Identifier):
Page No: c348-c360
Country: Pune, Maharashtra, India .
Area: Engineering
ISSN Number: 2349-5162


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

000175

Print This Page

Current Call For Paper

Jetir RMS