• N.Rushwanth Chowdary
• M. Ruben Pradeep

The feasibility of treated industrial wastewater as mixing water and effect of its constitutents on cement mortar was experimentally evaluted. The cememt mortar specimens were casted by using deionised water, treated paint industry wastewater, and presence of zinc, lead, cooper,nickel, chromium. The characteristics of the deionised water tap water and treated effluent of paint industry used in this experimental study. The impurities present in PITE are different concentrations and each one react differently with the constituents of the cement. Not all impurities will have adverse effects on the properties of the cement. Some react in such a way that the net result may be harmless or may even improve the concrete properties. The setting times are found to significantly retard with PITE , as metal concentration increased setting times are accelerated.So,there are no adverse effects on resulting compressive strength, when cement mortar specimens are cured in PITE. Therefore, the present experimental study confirms the feasibility of using PITE in cement mortar and metal ions also are interacted friendly with cement matrix. ,

"Assessment of setting times and compressive strength by using metal ions wastewater of paint industry", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 7, page no.c563-c579, July-2021, Available :http://www.jetir.org/papers/JETIR2107342.pdf

"Assessment of setting times and compressive strength by using metal ions wastewater of paint industry", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 7, page no. ppc563-c579, July-2021, Available at : http://www.jetir.org/papers/JETIR2107342.pdf