UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 4 | April 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 8 Issue 8
August-2021
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR2108120


Registration ID:
313662

Page Number

a919-a925

Share This Article


Jetir RMS

Title

Automatic Fault Detection in Transmission Lines using GSM Technology

Abstract

The point of convergence of this paper on automatic fault detection in transmission lines by using GSM technology. The Electric Power System is divided into many sections. One of that is the transmission system, where transmission line is transfer the power from generating station to the consumer. Both methods could encounter various types of malfunctions is usually referred to as a “Fault”. Fault is simply defined as a number of undesirable but unavoidable incidents can temporarily disturb the stable condition of the power system that occurs when the insulation of the system fails at any point. A smart GSM based fault detection and location system was used to adequately and accurately indicate and locate where the fault had occured. This will ensure a shorter response time for technical crew to rectify these faults and thus help save transformers and other power devices from damage and disasters. The system uses a voltage transformer, a current transformer, 8051 Microcontroller, ADC, RS-232 connector, and a GSM modem. When the fault has occurs the system automatically detects faults, analyses and classifies these faults and then, calculates the fault distance from the control room using an impedance-based algorithm method. Finally, the fault information is transmitted to the control room. In conclusion, the time required to locate a fault is drastically reduced, as the system automatically and accurately provides accurate fault location information. By using this project, we can detect the faults of three phase transmission lines one can monitor the Temperature, Voltage, Current by means of GSM modem by sending message.

Key Words

Transmission line, fault detection, GSM technology, automatic fault detection.

Cite This Article

"Automatic Fault Detection in Transmission Lines using GSM Technology ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 8, page no.a919-a925, August-2021, Available :http://www.jetir.org/papers/JETIR2108120.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"Automatic Fault Detection in Transmission Lines using GSM Technology ", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 8, page no. ppa919-a925, August-2021, Available at : http://www.jetir.org/papers/JETIR2108120.pdf

Publication Details

Published Paper ID: JETIR2108120
Registration ID: 313662
Published In: Volume 8 | Issue 8 | Year August-2021
DOI (Digital Object Identifier):
Page No: a919-a925
Country: -, -, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

0001219

Print This Page

Current Call For Paper

Jetir RMS