• Taskeen k. Kudalkar
• Vinda G. Gawade
• Yukta Kulkarni
• Siddharth Nigam
• Vaibhav Joshi

Foam concrete is a type of aerated lightweight concrete; foam concrete does not contain coarse aggregate and can be observed as an aerated mortar. Foam concrete is produced when pre-formed foam is added to slurry, the purpose of foam is to create an air void in concrete slurry. Foam is made separately by using foam generator; the foaming agent is diluted with water and aerated to create the foam. In this study foam concrete mixtures are produced with and without sand and attempts have been made for selecting the proportions of foam concrete mix for the target plastic density of 1900 kg/m3. Several cube specimens are prepared and tested for mixtures and then their density and their Compressive Strength properties were examined, Specific Strength and Percentage Strength gain for foamed concrete is compared with normal weight concrete and the results are reported. Foam concrete emerges as an alternative to ordinary concrete, as it lowers dead loads on the structure and foundation, contributes to energy conservation and drops the cost of production and labor cost.

"Experimental Study On Foam Concrete To Enhance Its Properties", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 9, page no.b616-b620, September-2021, Available :http://www.jetir.org/papers/JETIR2109174.pdf

"Experimental Study On Foam Concrete To Enhance Its Properties", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 9, page no. ppb616-b620, September-2021, Available at : http://www.jetir.org/papers/JETIR2109174.pdf