• Srinivasa S.
• Dr. Vipin Kumar

The sol-gel process produced nano-sized ZnTiO3. TGA/DTA analysis, X-ray diffraction, TMA analysis, and scanning electron microscopy were all used to learn more about the nano particles. Sol-gel powders were found to have crystallized at 600 degrees Celsius, with crystallite diameters of 10 nm. The SEM analysis reveals that most of the ZnTiO3 nano particles that were generated are clumped together. Sol was able to effectively produce ceramic nano-composites of (Al2O3/BaTiO3). Data from experiments showed that when Al2O3 was added to BaTiO3, the structure and particle size changed from tetragonal with 7e9 mm to orthorhombic with 400e600 nm. A very large peak may be seen in UV/Vi’s spectra between 550 and 700 nm. Finally, the influence of Al2O3 nanoparticles on the dielectric characteristics as a function of temperature and frequency was studied. For their potential usage as Multilayer ceramic capacitors in electrical devices, the dielectric properties of the composites have been researched in great depth.

Dielectric Properties, Structure, Dielectric Tunability, Al2O3/BaTiO3, Permittivity

"Di-Electric Properties of Alzn Tio3 and Alznni Tio3 Nano Particles Using Sol-Gel Powder", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.8, Issue 11, page no.d543-d549, November-2021, Available :http://www.jetir.org/papers/JETIR2111377.pdf

"Di-Electric Properties of Alzn Tio3 and Alznni Tio3 Nano Particles Using Sol-Gel Powder", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.8, Issue 11, page no. ppd543-d549, November-2021, Available at : http://www.jetir.org/papers/JETIR2111377.pdf