UGC Approved Journal no 63975(19)

ISSN: 2349-5162 | ESTD Year : 2014
Call for Paper
Volume 11 | Issue 3 | March 2024

JETIREXPLORE- Search Thousands of research papers



WhatsApp Contact
Click Here

Published in:

Volume 9 Issue 2
February-2022
eISSN: 2349-5162

UGC and ISSN approved 7.95 impact factor UGC Approved Journal no 63975

7.95 impact factor calculated by Google scholar

Unique Identifier

Published Paper ID:
JETIR2202474


Registration ID:
320684

Page Number

e585-e590

Share This Article


Jetir RMS

Title

OPTIMIZATION OF GEAR AND BENDING STRESS ANALYIS

Abstract

The main factors that cause the failure of gears are the bending stress and contact stress of the gear tooth. Stress analysis has been a key area of research to minimize failure and optimize design. This paper gives a finite element model for investigation of the stresses in the tooth during the meshing of gears for material steel 15Ni2Cr1Mo28. The model involves the involute profile of a spur gear. The geometrical parameters, such as the face width and module, are considered important for the variation of stresses in the design of gears. Using modeling software, 3-D models for different modules in spur gears were generated, and the simulation was performed using ANSYS to estimate the bending stress. The Lewis formula is used to calculate the bending stress. The results of the theoretical stress values are compared with the stress values from the finite element analysis.

Key Words

gearing, transmission system, root bending stress, surface contact stress, finite element analysis.

Cite This Article

"OPTIMIZATION OF GEAR AND BENDING STRESS ANALYIS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 2, page no.e585-e590, February-2022, Available :http://www.jetir.org/papers/JETIR2202474.pdf

ISSN


2349-5162 | Impact Factor 7.95 Calculate by Google Scholar

An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 7.95 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator

Cite This Article

"OPTIMIZATION OF GEAR AND BENDING STRESS ANALYIS", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 2, page no. ppe585-e590, February-2022, Available at : http://www.jetir.org/papers/JETIR2202474.pdf

Publication Details

Published Paper ID: JETIR2202474
Registration ID: 320684
Published In: Volume 9 | Issue 2 | Year February-2022
DOI (Digital Object Identifier):
Page No: e585-e590
Country: -, -, India .
Area: Engineering
ISSN Number: 2349-5162
Publisher: IJ Publication


Preview This Article


Downlaod

Click here for Article Preview

Download PDF

Downloads

000366

Print This Page

Current Call For Paper

Jetir RMS