• RamaDevi Gadi
• Dr,A.Kamala Kumari

Electric Vehicle is a hybrid vehicle that allows the user to choose the mode of its energy. The batteries in the electrically operated system can be charged by either Solar panels or a wall charge plug-in. The Photo Voltaic (PV) panels must be installed on the electric vehicle without affecting the rider's comfort ability. The concept of solar energy is that a high torque motor will be put on the vehicle, which will be generated by solar energy. The power that had been absorbed by the various sources can be used directly by the motor if the power matches the power requirement. If not, the motor will use the power from a battery. When the vehicle was not in use during the day, the solar panels will charge the battery. The design consists of a “drowsiness detector” which is the component in which the eyeglass can be placed while the vehicle is at rest. The eyeglass is compulsory for a vehicle while riding to prevent the rider from “drowsiness”. The eyeglass has a physical sensor and an eye blink sensor which is connected to the Arduino board using a UART Protocol as a wireless link that communicates between the board and the sensor. If the rider is sleeping, then the buzzer will be activated to alert the driver and the ignition would turn OFF preventing the rider from the accident.

Solar Panel, Electric Vehicle, Eye-blink sensor, Drowsiness.

"EV CHARGING WITH SOLAR ALONG WITH DROWSINESS DETECTION", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.9, Issue 9, page no.b119-b127, September-2022, Available :http://www.jetir.org/papers/JETIR2209117.pdf

"EV CHARGING WITH SOLAR ALONG WITH DROWSINESS DETECTION", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.9, Issue 9, page no. ppb119-b127, September-2022, Available at : http://www.jetir.org/papers/JETIR2209117.pdf