• Gadekar Akash
• Chaskar Bhushan
• Hande Shamrao
• Pawar Prashant
• Prof.Gayke P.R

In India, with fast growing constructions, the natural resources are becoming inadequate to fulfill the needs of construction. Materials like natural sand, coarse aggregate natural available good clay for bricks have become scarce, resulting in increase in masonry work, concrete work, and overall construction cost. Also, prices of cement, the main binding material, is going in increasing day by day. the issues of environmental and economic concern are addressed by the use of waste glass as partial replacement of fine aggregates in concrete. In the present investigation, concrete paving blocks may be produced with locally available cement, aggregates, fly ash and waste glass powder as the mineral admixture. Different mix proportions are prepared using cement replaced by equal quantity of fly ash and waste glass powder. The study indicated that fly ash and waste glass powder can effectively be used as cement replacement without substantial change in strength.

Waste glass, flyash,, M -Sand, compressive strength, Flexural strength, fine aggregate, Paving block.

"Manufacture of Paver Block Using Demolished Construction Waste", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 2, page no.40-44, February-2019, Available :http://www.jetir.org/papers/JETIRAE06008.pdf

"Manufacture of Paver Block Using Demolished Construction Waste", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 2, page no. pp40-44, February-2019, Available at : http://www.jetir.org/papers/JETIRAE06008.pdf