• PADMANABH JOSHI
• DIGAVIJY MAHAJAN
• SAINAND JADHAV

Daniel flow meters are optimized for the thickness in the meter body. The meters are of different types starting from the 2" size to 36" size. Mainly used for liquid and Gas flow in the industrial application. The meter body is evaluated for the thickness measurement for the assigned pressure. The meters are designed as per ASME standards. The newly Designed eight path (4+4) and six path (4+2) Gas and liquid ultrasonic flow meters are having reduced weight and thickness at the center section of the meter body. Due to its reduced weight the need of Analyzing the center section is raised. In the current project the meter body with the flanges is tested for the assigned pressure of 1800 psi and checked at three different sections along with the welded flanges and the bolts. The Bolts are having the pretension and selected as per ASME. Methodology adopted to achieve objectives The meter Body is analyzed as per ASME Section VIII - Elastic plastic method and the linear solution is obtained and the stress developed at three pleases

"Review Paper on Optimization of Meter Body with Flanges", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 4, page no.930-932, April-2019, Available :http://www.jetir.org/papers/JETIRBB06177.pdf

"Review Paper on Optimization of Meter Body with Flanges", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 4, page no. pp930-932, April-2019, Available at : http://www.jetir.org/papers/JETIRBB06177.pdf