• Mr. Shivkumar Hallale
• Mr. Rohit M. Shinde
• Ms. Vaishnavi Battul
• Ms. Tejashree Gulve

In India, total quantum of waste from construction industry is estimated to be between12 to 14 million tons per annum, out of which 7 to 8 million tones are concrete and brick waste. Construction, demolition, renovation generates large amount of concrete waste. This waste is either dumped or it is diverted towards landfill. This concrete waste can be qualitatively reused for manufacturing of various concrete blocks. In this report, we represent the concept of sustainable use of concrete waste in concrete which can be used in manufacturing of interlocking paver blocks. After crushing, this concrete waste can be used as a replacement of coarse and fine aggregates in two stages as complete and half replacement in paver blocks by considering IS specification. In this project, by considering suitable materials, size, shape, mix design etc. and by accepting specific casting methodology and by performing various specific tests, we are going to cast interlocking paver blocks. From present study concluded that the The partially replaced demolished aggregate in paving block gives higher strength

Paver Block, Sustainable, demolished aggregate

"EXPERIMENTAL INVESTIGATION ON EFFECT OF DEMOLISHED AGGREGATE IN PAVING BLOCK", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 7, page no.1380-1386, July-2018, Available :http://www.jetir.org/papers/JETIRC006239.pdf

"EXPERIMENTAL INVESTIGATION ON EFFECT OF DEMOLISHED AGGREGATE IN PAVING BLOCK", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 7, page no. pp1380-1386, July-2018, Available at : http://www.jetir.org/papers/JETIRC006239.pdf