• Jitendra M. Mistry
• Priyal R. Patel
• Dhaval R. Joshi
• Tejas J Ghotikar
• Jignesh S Thakkar

Composite area unit gaining more and additional attention in structural, thermal, tribological and environmental applications these days, as a result of they need high strength to weight quantitative relation than typical alloy. during this work, Silicon carbide of a 100-mesh size has been used as reinforcement and its weight proportion is varied by 5 % in Aluminum 7075 matrix. Aluminum Matrix Composites (AMCs) have been fabricated using electromagnetic stir (EMS) casting methodology. The impact of Electro Discharge Machining (EDM) method parameter on Metal Removal Rate (MRR) and Surface Roughness (SR) are investigated. it's noticed that current was the foremost influencing issue on MRR and SR for 5 weight % SiC reinforced AMCs. Regression models for MRR and SR were developed for 5% wt. SiC reinforced AMCs. AMCs can widely use in Piston, brake drum, brake disc, poppet valve guide.

Aluminum Matrix Composites, Electromagnetic stir casting, Electro Discharge Machining.

"Effect of EDM process parameters on Metal Removal Rate and Surface Roughness of Aluminum Matrix Composite", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.337-341, May 2019, Available :http://www.jetir.org/papers/JETIRCQ06063.pdf

"Effect of EDM process parameters on Metal Removal Rate and Surface Roughness of Aluminum Matrix Composite", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp337-341, May 2019, Available at : http://www.jetir.org/papers/JETIRCQ06063.pdf