• CHAITRASHREE S R
• RAJESHWARI HIREMAT
• SHWETHA N
• TEJASWINI B
• MYTHRI Y V

This project proposes a distributed generator (DG) placement methodology based on newly defined term reactive power loadability for integration of cleaner and greener renewable energy sources in our emerging distribution networks. Firstly, the weak and strong buses of the system are determined by using reactive power loadability and simulation results shows the sensitivity of the location of renewable energy based DG on voltage profile and stability of the system. Then, a suitable location is identified for two principal types DG, i. e., wind and solar, separately to enhance the stability margin of the system. Voltage regulation is calculating to identify the best location for DG placement to reduce the power loss of the system and thereby increases overall system efficiency. Finally, a minimum value of capacitor size is also determined to improve the stability of the system as well as to reduce the cost of compensation with distributed wind generator.

Distributed Generator (DG), Point Of Connection (POC), Concentrating Solar Power (CSP).

"HYBRID DG PLACEMENT IN POWER DISTRIBUTION NETWORK TO ENHANCE SYSTEM STABILITY", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 5, page no.167-180, May 2019, Available :http://www.jetir.org/papers/JETIRCR06035.pdf

"HYBRID DG PLACEMENT IN POWER DISTRIBUTION NETWORK TO ENHANCE SYSTEM STABILITY", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 5, page no. pp167-180, May 2019, Available at : http://www.jetir.org/papers/JETIRCR06035.pdf